Selection of dust remover in Cupola
|Terms of Trade:||FOB,CIF|
|Delivery Time:||30 Days|
|Place of Origin:||Botou city, hebei province, China|
The selection of the dust collector of the cupola is based on the large fluctuation range of the flue gas temperature, which mainly depends on the capacity of the furnace, the ratio of coke and iron, the height of the material and the unit air supply. In general, the temperature of the flue gas is about 100~200 degrees centigrade when there is no clear fire, and the temperature is generally 300~500 C when there are more iron chips and oxide skins in the molten iron or raw material. From the end of the feeding to the stop of the blast stage, as the material level drops and the fire rises, the temperature rises sharply, the fire is completely reburning at 200~900 degrees C; the fire is not completely reburning at 150~800; no further combustion is 100~600, and the blink of the blower is 900~1250 centigrade; the furnace is 600~800 centigrade; the capacity is large. In the cupola, the furnace gas contains more CO content, and the temperature can reach 800~1000 degrees centigrade when reburning, and the gas temperature of the pulverized coal cupola is always higher, generally 800~1000. According to the general situation of cupola flue gas, the cupola deduster adopts the following dust removal equipment to complete the purification of the cupola flue gas.
1. Cyclone dust collector is a primary and efficient cupola deduster. The dust removal efficiency can reach more than 70%, and the resistance of the dust collector is less than 800Pa. The dust remover can separate the particles from the large particles in the flue gas and the centrifugal force produced by the rotating airflow. The dust particles are separated from the dust flow, and the dust is discharged from the discharger. The purged flue gas is discharged into the two stage dust removal and cooling equipment of the cupola.
2. The structure and principle of the cooler: the cooler is made up of upper box, middle box and ash hopper. The flue gas of the cupola is set to a number of small pipes through the diameter of the main pipe. The section becomes larger, the wind speed slows down, and the wind blower is attached by the strong cold wind of the Axial Fan in order to reduce the temperature, and it also plays the role of settlement. The flue gas after cooling is drained into the cupola deduster through the pipeline.
3, cupola dust collector: in recent years, the application of bag filter in the fume cleaning system of the cupola has developed rapidly. The dust removal efficiency is more than 99%, and the dust emission concentration can be stabilized below 50mg/m3. The cleaning and cooling equipment before the bag filter (such as cyclone, cooler, etc.) can lighten the wear of bag filter.
When the filter material of cupola deduster is used as polyester filter material, the filtration speed is about 1.0m/min. For example, when using glass fiber filter material, the filtration speed is about 0.5m/min.
ZC mechanical rotary back blow flat bag filter
Its working principle, filtering conditions and dust laden gases enter the upper space of the filter chamber in tangential direction. The small particles of large particles and coagulated dust particles are dispersed along the clearance of the filter chamber bag, and the clean air is collected through the bag wall through the bag wall through the filter bag, which is absorbed by the ventilator and discharged into the atmosphere.
When the filter condition is carried out, the dust is attached to the surface of the bag, and the resistance of the filter bag is gradually increased. When the upper limit of the control resistance is reached, the differential pressure transmitter of the interface connected to the wind pipe of the dust collector automatically starts the work of the anti blowing mechanism.
A sufficient amount of blow back air flow is blown into the filter bag by the rotary arm nozzle to blow back one by one. When the resistance of the filter bag falls to the lower limit, the anti blow mechanism stops working automatically.
The reverse blowing mechanism, in order to save the power of the Air Blower, reduce the back blowing and dust cleaning, is not restricted by the air source conditions in the use, easy to replace, easy to maintain, reliable in operation, to overcome the malady of the air pulsation in compressed air, to use a long filter bag, to make full use of space and small area. The mechanical rotary reverse blow flat bag filter is the best equipment for the cupola purification system.
Botou Youjian Environmental Protection Equipment Co. LTD.
Botou youjian environmental protection equipment co., LTD. is a professional company with the development, design, production, installation and service of environmental engineering and environmental protection equipment. Company is located in the coronal has the reputation of "hometown of pears" botou city, hebei province, the company in the east near the beijing-shanghai railway, beijing-shanghai high-speed and 104 national highway, 106 state road and west stone yellow high-speed, the geographical position is superior, the transportation is very convenient. Our company adheres to the tenet of quality first, users first, now reside in the domestic high grade, high quality, high performance, environmental protection equipment technology development and production base, production volume in the national top Xu in the industry. Main technical products are: cloth bag dust collector, single filter, cyclone, and electrostatic precipitator and wet dust collector, dust remover, the filter cartridge dust collector, injection machine and other kinds of environmental pollution control technology and equipment, dust bag, dust skeleton, electromagnetic pulse valve, discharge feeder and other accessories, products are widely used in metallurgy, electric power, building materials, chemical industry, etc. Company always adheres to the philosophy of science and technology innovation, work closely with scientific research units and the major design institute, has developed 30 many kinds of environmental protection technology and products, more than 20 projects to undertake all kinds of large-scale environmental engineering, the products sell well in more than 30 provinces and cities and exported to the United States, India, Vietnam and other countries and regions, has won the broad masses of users and design units. Among them, "pulse bag filter" and "high voltage electrostatic precipitator" were first approved by the provincial and national environmental protection bureau, and won the provincial and advanced environmental science and technology awards. We will take this as a new starting point and continue to work on the development and development of environmental engineering and environmental protection products. We will continue to maintain the advantages of high technology level, high quality of products and good reputation of enterprises. Establish the correct scientific outlook on development, constantly improve the overall quality of the company, enhance the market competitiveness, and push the company to a new level. In the development process, the company adheres to the combination of scientific research, design and production services, and takes the market with new mechanism, new thinking and new technology, and has achieved remarkable results. Company will continue to cooperate with the social from all walks of life ability, and sincerely hope friends from all walks of life will, as always support and concern the development of our company, for the development of the construction of a harmonious society, for the environmental protection enterprise strive brilliant tomorrow! Enterprise tenet: the lowest price but the best quality!
- Company Name: Botou Youjian Environmental Protection Equipment Co. LTD.
- Representative: douliangliang
- Product/Service: Dust Collecter , Industrial Dust Collector , Dust Collector Fittings , Cyclone Dust Collector , Desulfurization Collector , Filter Press
- Capital (Million US $): 1000000RMB
- Year Established: 2014
- Total Annual Sales Volume (Million US $): US$10 Million - US$50 Million
- Export Percentage: 11% - 20%
- Total Annual Purchase Volume (Million US $): US$1 Million - US$2.5 Million
- No. of Production Lines: 3
- No. of R&D Staff: 5 -10 People
- No. of QC Staff: 5 -10 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 10,000-30,000 square meters
- Factory Location: Shiying industrial zone, botou city, hebei province, China
- Contact Person: Mr. Dou Liangliang
- Tel: 86-0317-5660622
Premium Related Products